IP811-BRI5 is not shown under "Gateway" and also unter "Routes"
Hi,
I have a problem with the IP811. The interface BRI5 is not shown under ->Gateway ->Interfaces and also not unter ->Gateway ->Routes.
The BRI5 interface is only seen under ->Interfaces here you can switch the interface to "NT-Mode" and you can modify the "Protocol".
But I need the BRI5 fo a customer which have now 5 T0's over ISDN and the provider "Deutsche Telekom" switched the ISDN to SIP. So I need the IP811 as mediakonverter from SIP to ISDN. And the IP811 provides 5 BRI-interfaces.
I use V13R1 SR3
Unter V12r2 SR23 was the same issue.
IP811-BRI5-03.jpg
I have a problem with the IP811. The interface BRI5 is not shown under ->Gateway ->Interfaces and also not unter ->Gateway ->Routes.
The BRI5 interface is only seen under ->Interfaces here you can switch the interface to "NT-Mode" and you can modify the "Protocol".
But I need the BRI5 fo a customer which have now 5 T0's over ISDN and the provider "Deutsche Telekom" switched the ISDN to SIP. So I need the IP811 as mediakonverter from SIP to ISDN. And the IP811 provides 5 BRI-interfaces.
I use V13R1 SR3
Unter V12r2 SR23 was the same issue.

